It's really not good not to pay attention to matters such as spiral bevel gears

Although Spiral Bevel Gears are used well in many mechanical equipment, we still need to pay attention to some issues when installing them, otherwise it may cause serious consequences for our use.

1. When installing the Spiral Bevel Gear, adjust the centerline of the two shafts to the same plane, and then we can proceed with the next installation.

2. Secondly, it is necessary to conduct a coloring inspection on the contact surface. We should pay attention not to cause the shaft to move in series during the rotation process, and ensure contact even when there is no load

The surface is close to the small end of the gear.

3. When installing the spiral Bevel Gear, we also need to pay attention to whether the contact spots on the meshing tooth surfaces of its two gears can reach over seventy, which is very heavy

Required; Secondly, it is necessary to control the gear meshing clearance, which should not be too large or too small. These are all things that need to be controlled by oneself.